#USE MULTIBLE INPUTES TO GRANDTOTAL HOW TO#

One of the inputs will be sent to the right channel and one to the left. The essential piece of kit you need is a 3.5mm splitter cable which is configured to have two mono input sockets with a stereo male output jack. Just because itвЂ™s simple though, that doesnвЂ™t mean itвЂ™s not effective вЂ“ it can deliver good audio quality, and if set up in the correct way you can have each mic on a separate track. This is probably the cheapest option and most straightforward. Two 3.5mm Jack Microphones to One 3.5mm Jack Input WeвЂ™ll start with two mics and then move onto three and four. Now that you know the considerations, letвЂ™s look at what options you have for connecting multiple microphones to one input source. ItвЂ™s also less to think about when setting up вЂ“ every mic has itвЂ™s own nuances so trying to remember and account for this across 3 or 4 microphones can quite quickly become very difficult and stressful.

#USE MULTIBLE INPUTES TO GRANDTOTAL HOW TO#

Mixing brands and models can work but if each mic is the same, over time youвЂ™ll get used to the sound and will know how to get the best out of them when producing your show. When using multiple mics, try where possible to use the same ones. The last thing to mention is sound consistency. Normally it doesnвЂ™t weaken it by too much and therefore shouldnвЂ™t cause too many issues but itвЂ™s one thing to consider and a good preamp in your input device would be an advantage to combat this. You also need to take into account that when using one of the options which involve a splitter cable, youвЂ™re likely to end up with a weakened signal. If in one of the mics, for example, somebody coughs, you can remove this in post but if the other personвЂ™s mic is too close, the cough will also be quite loud on that track and if it happens at the same time that person is speaking, thereвЂ™s nothing youвЂ™ll be able to do to remove it. If youвЂ™re trying to achieve each mic on a separate channel (which again is possible with some of the options below), recording with the mics too close together could defeat the object. When we get to the different options below, some will allow you to monitor each mic individually but others wonвЂ™t.ДЄnother thing you need to think about is mic placement and more specifically, the distance between each one. The reality is though that when youвЂ™re connecting multiple mics to one input, depending on the setup, you may have to monitor them all at the same time so more focus is needed to identify issues. Make sure that you do a thorough setup and where possible, sound test each mic individually to ensure that the audio is good. When youвЂ™re the one producing your podcast as well as the one hosting it and youвЂ™re focussing on conducting that killer interview, audio monitoring can sometimes be a secondary consideration. You must be able to hear each microphone properly and pick up on any issues with the audio. The first thing you need to think about when using multiple mics is monitoring.

More than Four Microphones into one 3.5mm Jack Input or USB PortД¬onsiderations when Using Multiple Microphones.

Three or Four XLR Microphones to One USB Port.

Three or Four 3.5mm or ВјвЂќ Jack Microphones to One 3.5mm Jack Input.

Two XLR Microphones to One 3.5mm Jack Input.

Two 3.5mm Jack Microphones to One 3.5mm Jack Input.

Considerations when Using Multiple Microphones.

However, if you need to connect more mics or output to USB, you may have to consider an audio interface or a mixer.Д«efore you go off and buy a second, third, or even fourth microphone though, let us first look at what it means to use more than one mic and some of the things you need to think about to avoid it going horribly wrong. If you only need to connect two 3.5mm microphones to one 3.5mm input, a simple splitter cable configured to output one mic on the left channel and one mic on the right would suffice. In this article, weвЂ™ll explore the different ways of connecting multiple microphones to a single input source, whether that be a digital recording device or a computer.Д«y the end, youвЂ™ll have a good understanding of what kit you might need for a suitable setup. There are different ways to connect all this, but the aim should always be to achieve the best quality audio and where possible to have each mic on a separate track which will make editing much easier. The additional microphones could be for your guest(s), a co-host, or people involved in a panel discussion.

Unless youвЂ™re a solo podcaster, youвЂ™ll need to record with more than one microphone. Please assume all links on this page are affiliate links. As an Amazon Associate we earn from qualifying purchases when you use one of our links.

Affiliate Disclosure: The Seasoned Podcaster is supported by its readers.

Use multible inputes to grandtotal